Dutch Seam (Wall)

Dutch Seam^® is a continuous standing seam metal panel with an integral seam, which was originally developed as a roof panel. With the lock and seam an integral part of the panel, there are no seam caps to install. This prevents “blow-off” or “creeping” of the cap or seam. Just snap the panel onto the previously installed panel, fasten the clip and the panel is in place. This panel can be installed vertically, horizontally, and diagonally. You can also enhance aesthetics of Dutch Seam by using factory fabricated Elite Series accessories, including the Z Box and Closure Angle shown.

Line Drawing
Product Info
CAD Details
Gallery
Documents

Line Drawing

Product Info

SKU:

MRD110
MRD150
MRD194

Material:

.032, .040 aluminum
24, 22* ga. metallic coated steel
24 ga. 55% Al-Zn alloy coated steel with acrylic coating
16, 20 oz. copper*
.8 mm & 1.0 mm zinc* (inquire with ATAS)

Panel Coverage:

11”
15”
19¼”
(Stiffening ribs standard, specify without ribs or with striations)

Minimum Panel Length:

2’-0”

Maximum Panel Length:

Transportation limitations and/or product and project design considerations. For project specific recommendations, please contact ATAS.

Seam Height:

1½”

Available:

Tapered

Texture:

Smooth
Stucco Embossed

Finish:

70% PVDF

Colors:

Choice of over 40 stock colors
Custom colors and finishes available*

Anodized:

LA Extra Dark Bronze Anodized (.040)
BlackMatt Anodized (.040)
Dark Bronze Anodized (.032 & .040)
Clear Satin Anodized (.032, & .040)

Accessories:

A complete line of trims available in matching colors, gauge, and finish or as specified

CAD Details

Details provided allow for typical expansion and contraction values of the metal cladding materials as provided by ATAS International, Inc only. Allowance must be made for additional sub-structure movement based upon materials used and overall project design.